background image

Makita SKR200

Safety Instructions

20

EN

Noise emissions (laser receiver)

CAUTION

The A-weighted sound pressure level of 
the signal sound is > 80 db(A) at a distance 
of one meter.

Do not hold the laser receiver directly 
to your ear!

Hazards in use

WARNING

Watch out for erroneous measurement 
results if the product has been dropped or 
has been misused, modified, stored for 
long periods or transported. 
Carry out periodic test measurements.
Particularly after the instrument has been 
subject to abnormal use, and before, 
during and after important measurements.
Refer to section "Checking the Accuracy".

WARNING

Because of the risk of electrocution, it is 
very dangerous to use grade rods and 
staffs in the vicinity of electrical 
installations such as power cables or 
electrical railways.

Precautions:

Keep at a safe distance from electrical 
installations. If it is essential to work in this 
environment, first contact the safety 
authorities responsible for the electrical 
installations and follow their instructions.

WARNING

If the product is used with accessories, for
example masts, staffs, poles, you may 
increase the risk of being struck by 
lightning.

Precautions:

Do not use the product in a thunderstorm.

WARNING

Inadequate securing of the working site 
can lead to dangerous situations, for 
example in traffic, on building sites, and at 
industrial installations.

Precautions:

Always ensure that the working site is 
adequately secured. Adhere to the 
regulations governing safety and accident 
prevention and road traffic.

WARNING

If the accessories used with the product 
are not properly secured and the product is 
subjected to mechanical shock, for 
example blows or falling, the product may 
be damaged or people may sustain injury.

Precautions:

When setting-up the product, make sure 
that the accessories are correctly adapted, 
fitted, secured, and locked in position. 
Avoid subjecting the product to 
mechanical stress.

WARNING

Changes or modifications not expressly 
approved could void the user’s authority to 
operate the equipment.

CAUTION

Never attempt to repair the product 
yourself. In case of damage, contact a 
local dealer.

Disposal

CAUTION

Flat batteries must not be disposed of with 
household waste. Care for the 
environment and take them to the 
collection points provided in accordance 
with national or local regulations.
The product must not be disposed with 
household waste.
Dispose of the product 
appropriately in accordance with 
the national regulations in force in 
your country.
Adhere to the national and country 
specific regulations.
Product specific treatment and waste 
management can be downloaded from our 
homepage.

Summary of Contents for SKR200























Reviews: