4
ENGLISH
* Specifications and battery cartridge may differ from country to country.
* The weight may differ depending on the battery cartridge. The lightest and heaviest combination,
according to EPTA-Procedure 01/2014, are shown in the table.
NOTE:
When used at 0°C or lower temperatures, the laser lines are weak just after turning the
power on. Turn the laser ON and wait for it to stabilize.
Symbols
The definitions below describe the level of severity for each signal word and the meaning of each
symbol used in this manual.
Please read the manual and pay attention to these symbols.
: Read instruction manual.
DANGER
: This indicates the risk of death
or frequent serious injury.
WARNING
: This indicates the risk of
serious injury.
CAUTION
: This indicates the risk of
light injury.
NOTICE
NOTE
: This indicates the risk of
malfunction or damage to property.
: This indicates the risk of
electric shock.
: This indicates the risk of fire.
: Laser warning
Intended use
The measuring tool is intended for levelling jobs with the use of horizontal lines, vertical lines and the
plumb point.
Laser Beam Related Safety Standards
This product complies with the following standards:
• IEC 60825-1:2014
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT POWER: P=1 mW
Wavelength: λ=510 ~ 530nm / 650 ~ 660nm
Pulse: 40 to 100μs/ 5 kHz (λ=510 ~ 530 nm)
: Only for EU countries
Due to the presence of hazardous
components in the equipment, waste
electrical and electronic equipment,
accumulators and batteries may have a
negative impact on the environment and
human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and
waste accumulators and batteries, as
well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accordance
with the regulations on environmental
protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
