R
epair
P 9/ 15
[4] DISASSEMBLY/ ASSEMBLY
[4]-8. Ignition (cont.)
Fig. 29
Fig. 30
REMOVING OF IGNITION COIL
(1) Remove M5x50 Hex socket head bolt and two M5x22 Hex socket head bolts (with washers and super lock washers)
and four M5x14 Pan head screws (with washers and spring lock washers), and then separate Blower housing,
Muffler cover and Cylinder cover from the machine. (
Figs. 29 and 30
)
(2) Before removing Ignition coil, pull out
Cable terminal. (
Fig. 31
)
(3) Remove two M5x22 Hex socket head bolts
to separate Ignition coil from Crank case
assembly. (
Figs. 31 and 32
)
M5x22 Hex socket
head bolt (2 pcs.)
Recoil starter
assembly
(See
Fig. 30
for
the appearance
viewed from
Cylinder cover.)
M5x50 Hex socket
head bolt
Blower housing
Muffler cover
Cylinder cover
Muffler cover
M5x14 Pan head screw
M5x14 Pan head
screw (2 pcs.)
M5x14 Pan head screw
Fig. 31
Fig. 32
ASSEMBLING OF IGNITION COIL
See
Fig. 32
.
(1) While attaching 0.45mm thickness gauge of 1R366 to
the magnet portion of Flywheel, set Ignition coil in place.
(2) Remove the thickness gauge.
Then, turn Flywheel by hand to check whether it turns smoothly
without being stuck.
Ignition coil
Flywheel
Ignition coil
Crank case
assembly
Cable terminal
M5x22 Hex socket head bolt (2 pcs.)
M5x22 Hex socket head bolt
0.45mm thickness
gauge of 1R366
Flywheel
