P 4/ 10
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature, Spiral bevel gear (small), Ball bearings 6000DDW, 608ZZ (cont.)
DISASSEMBLING
1. Remove Retaining ring R-26 with 1R291.
2. Reassemble Armature to Gear housing, then small Spiral
bevel gear to Armature shaft. Tighten M7 Hex nut
provisionally by turning it clockwise.
1R291
Retaining
ring R-26
Ball bearing 6000DDW
(2) Remove Ball bearing from Gear housing as drawn in
Fig. 3
.
3. Remove Ball bearing 6000DDW together with Armature assembly by tapping the end of Gear housing with
a plastic hammer,
4. Removing M7 Hex nut, small Spiral bevel gear and
Ball bearing 6000DDW from Armature assembly.
Fig. 3
M7 Hex nut
small Spiral
bevel gear
Armature
Armature
M7 Hex nut
small Spiral bevel gear
Ball bearing 6000DDW
Ball bearing 608ZZ
1R269
6. Remove Ball bearing 608ZZ with 1R269.