P 8/ 8
Setting and Wiring of Noise suppressor
and Resistance
Facing the wire connected side to Switch handle set L,
set Noise suppressor and Resistance to the handle.
Switch handle set L
Noise
suppressor
Noise
suppressor
(If it is used.)
Terminal block
(If it is used.)
Resistance
Resistance
Closed end splice
Put Closed end splice
to the place here.
Be careful not to put
any lead wires under
Terminal block.
Inner wall
Rib
Switch
Wiring through Line filter
Pass Field lead wires (orange, purple)
through Line filter as drawn below.
And put it to the place as drawn right.
Line filter
Put Field lead wires between Rib and
the inner wall of Switch handle L.
Wiring in Switch handle L
with Radio interference suppression
W
iring diagram
Fig. D-3
Two holes type
One hole type
[Right]
[Wrong]
