R
epair
ASSEMBLING
(1) Assemble Gear section by reversing the disassembly procedure. (
Fig. 7
)
(2) Assemble Gear housing and Gear cover to Motor housing section by reversing the disassembly procedure.
Refer to
Fig. 2
of page 2
.
Note
: 1. Use a rag to protect Switch handle in use of vise.
2. Turn 1R340 c
ounterclockwise
for setting Bearing retainer 23-36 in place.
P 5/ 8
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Spindle and Gear section (cont.)
Fig. 7
1. Assemble Ball bearing 626ZZ
to Gear housing complete.
2. Pressfit Ball bearing 6202DDW
to Spindle.
3. Insert Ring 15 to Spindle.
Then, mount Key 5 to
the groove of Spindle.
Spindle
Key 5
4. Assemble Spindle section to Gear housing complete.
Then, assemble Spur gear 47 to Spindle while fitting
its cut portion to Key 5. And then, secure the spur gear
with Retaining ring S-14.
5. Insert Gear complete 7-41 into Ball bearing
626LLB with Spur gear 47 engaged.
Note
: Do not forget to assemble Flat washer 6.
6. Assemble Pin 3 and Gasket to Gear housing complete.
Retaining ring S-14
Ring 15
Ball bearing
6202DDW
Spindle
Ball bearing
626ZZ
Rubber pin 4
cut portion
Spur gear 47
Gear complete 7-41
Flat washer 6
Gasket
Pin 3
