P 5/ 10
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Spiral bevel gear 37 and Ball bearing 6201DDW (cont.)
DISASSEMBLING
Fig. 7
1R026
1R281
1R217
approx.
10 mm
(2) Disassemble Spindle as drawn in
Fig. 7
.
(3) Disassemble Ball bearing 6201DDW from Bearing box. (
Fig. 8
)
Bearing box
Spindle
Spiral bevel
gear 37
2. Push Spindle out a little by tapping 1R026
carefully using arbor press with a down stroke
of approx.10mm long. Then remove 1R026.
1. Put Bearing box on 1R217,
then put 1R026 over the
stepped portion of Spindle.
Spindle
Fig. 8
1R005
4. Remove Retaining ring R-32 with 1R005.
5. Remove Ball bearing 6201DDW from Bearing box.
In this step, Flat washer 12 is removed.
Ball bearing 6201DDW
Flat washer 12
Retaining ring R-32
3. Put 1R281 on Spindle.
Then, press 1R281 to
remove Spindle from
Spiral bevel gear 37.
Note:
Do not reuse removed Ball bearing 6201DDW
because it is damaged in this step.
