P 14/ 35
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Safety cover A
ASSEMBLING
Fig. 43
(1) Assemble Safety cover A section. (
Fig. 42
) And then mount the Safety cover A section to Safety cover B. (
Fig. 43
)
(2) Mount the Safety cover section to Blade case complete as illustrated in
Fig. 44
.
Bind CT4x12
Tapping
screw (3pcs.)
Safety cover A
Mount Safety cover A section to
Safety cover B by tightening
three Bind CT4x12 Tapping screws.
Safety cover B
Center cover
Fig. 42
After applying grease to Torsion
spring 45 as drawn in
Fig. 2
, set
the ends to Safety cover A.
The legs of Torsion
spring 45
Fit the five bosses of Safety cover A
into the five holes of Center washer.
Apply Grease to the outer periphery
of Center washer that contacts Center
cover A.
Set Center cover in place and fit the five
bosses of Safety cover A into the five holes
of Center plate. Then fasten them by
tightening CT4x16 Tapping screw.
Center
washer
Five bosses
Center
cover
Center plate
Safety cover A
CT4x16
Tapping screw
Fig. 44
Tighten M8x12 Hex flange head bolt and lift up
Center cover until it touches the bolt.
Tighten Hex flange head bolt firmly to fix Center cover
at the position designated below.
M8x12 Hex flange
head bolt
Center cover
M8x12 Hex
flange
head bolt