P 11/ 35
R
epair
(11) R
emove Ball bearing 608DDW from Spindle using 1R269. and then
remove Retaining ring S-15 using 1R291. (
Fig. 28
)
(12) Receive Ball bearing 6002DDW with U-shape table of Arbor press,
and press down Spindle as illustrated in
Fig. 29.
Helical gear 28 can be removed.
(Fig. 30)
DISASSEMBLING
Note:
Do not forget to apply Lubricants and put Gasket on
Bearing box complete.
(1) Assemble Ball bearing 6002DDW to Bearing box,
and pressfit Spindle into Ball bearing 6002DDW.
(2) While receiving the step of Spindle with 1R036,
and pressfit Helical gear 28 using Arbor press and 1R232.
(
Fig. 31
)
Note
: Be careful that the protrusion of Helical gear 28 faces
Ball bearing 6002DDW.
(3) Snap Retaining ring S-15 into the groove of Spindle using
1R291. Press down Ball bearing 608DDW to Spindle
using Arbor press.
See
Fig. 30
.
(4) Receive
the step of Spindle with the lip of hole in 1R034,
and pressfit Spindle to Helical gear 27 using Arbor press
and 1R031.
(Fig. 32)
Note:
Be careful that the protrusion of Helical gear 27 faces
1R031.
Pressift Spindle into Ball bearing 6000ZZ.
Put Steel ball 4 into the hole in Gear shaft.
(5)
Fit the assembled part shown in
Fig. 32
into Bearing box complete. (
Fig. 33
)
ASSEMBLING
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28 (cont.)
Fig. 29
Fig. 28
Fig. 31
Fig. 30
Ball bearing
608DDW
Ball bearing 608DDW
Retaining
ring S-15
Retaining ring S-15
Spindle
Spindle
Ball bearing
6002DDW
Arbor
press
(U shape table)
Helical
gear 28
Helical gear 28
Helical gear 28
Protrusion
Gasket
Spindle
1R232
Arbor press
Ball bearing 6002DDW
Bearing box complete
1R036
Gasket
Bearing box complete
Fig. 32
Fig. 33
Protrusion
Helical gear 27
Hole
Gear shaft
Step
Lip of hole in 1R034
1R034
1R031
Steel ball 4
Ball bearing
6000ZZ