Makita HU02 Instruction Manual Download Page 4

carefully. The user is responsible for all damages 
to third parties. 

9. 

Never use the trimmer when under the influence of 
alcohol, drugs or medication. 

10.  Work gloves of stout leather are part of the basic 

equipment of the hedge trimmer and must always 
be worn when working with it. Also wear sturdy 
shoes with anti-skid soles. 

11.  Before starting work check to make sure that the 

trimmer is in good and safe working order. Ensure 
guards are fitted properly. The hedge trimmer 
must not be used unless fully assembled. 

12.  Make sure you have a secure footing before 

starting operation. 

13.  Hold the tool firmly when using the tool. 
14.  Do not operate the tool at no-load unnecessarily. 
15.  Immediately switch off the motor and remove the 

battery cartridge if the cutter should come into 
contact with a fence or other hard object. Check 
the cutter for damage, and if damaged repair 
immediately. 

16.  Before checking the cutter, taking care of faults, or 

removing material caught in the cutter, always 
switch off the trimmer and remove the battery 
cartridge. 

17.  Switch off the trimmer and remove the battery 

cartridge before doing any maintenance work. 

18.  When moving the hedge trimmer to another 

location, including during work, always remove the 
battery cartridge and put the blade cover on the 
cutter blades. Never carry or transport the trimmer 
with the cutter running. Never grasp the cutter with 
your hands. 

19.  Clean the hedge trimmer and especially the cutter 

after use, and before putting the trimmer into 
storage for extended periods. Lightly oil the cutter 
and put on the cover. The cover supplied with the 
unit can be hung on the wall, providing a safe and 
practical way to store the hedge trimmer. 

20.  Store the hedge trimmer with the cover on, in a dry 

room. Keep it out of reach of children. Never store 
the trimmer outdoors. 

SAVE THESE INSTRUCTIONS. 

 

WARNING: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to safety rules for the subject product. MISUSE or 
failure to follow the safety rules stated in this 
instruction manual may cause serious personal 
injury. 

 
 
 
 

USG001-2 

 

WARNING: 

Use of this product can create dust containing chemicals 
which may cause respiratory or other illnesses. 
Some examples of these chemicals are compounds found 
in pesticides, insecticides, fertilizers and herbicides. 
Your risk from these exposures varies, depending on 
how often you do this type of work. To reduce your 
exposure to these chemicals: work in a well ventilated 
area, and work with approved safety equipment, such as 
those dust masks that are specially designed to filter out 
microscopic particles. 

USD301-1 

Symbols 

The followings show the symbols used for tool. 

 volts 

 

 direct 

current 

 

 no 

load 

speed 

 

  revolutions or reciprocation per minute 

 

ENC009-1 

IMPORTANT SAFETY 
INSTRUCTIONS 
FOR BATTERY CARTRIDGE 

1. 

Before using battery cartridge, read all 
instructions and cautionary markings on (1) 
battery charger, (2) battery, and (3) product 
using battery. 

2. 

Do not disassemble battery cartridge. 

3. 

If operating time has become excessively 
shorter, stop operating immediately. It may 
result in a risk of overheating, possible burns 
and even an explosion. 

4. 

If electrolyte gets into your eyes, rinse them 
out with clear water and seek medical 
attention right away. It may result in loss of 
your eyesight. 

5. 

Do not short the battery cartridge: 

(1) 

Do not touch the terminals with any 
conductive material. 

(2) 

Avoid storing battery cartridge in a 
container with other metal objects such as 
nails, coins, etc. 

(3) 

Do not expose battery cartridge to water 
or rain. 

A battery short can cause a large current flow, 
overheating, possible burns and even a 
breakdown. 

Summary of Contents for HU02

































Reviews: