![background image](http://html1.mh-extra.com/html/makita/hr3541fc/hr3541fc_technical-information_4244140008.webp)
P 8/ 19
R
epair
[5] DISASSEMBLY/ASSEMBLY
[5]-3. Cylinder section (cont.)
DISASSEMBLING
ASSEMBLING
Fig. 13
Rubber ring 13
Remove Rubber ring 13 and Ring 13
if they are left in Cylinder 25 in
disassembling Tool holder section.
Slide plate
Slide plate is removed from
Cylinder 25.
Align Slide plate with the
elliptic hole of Cylinder 25
by turning approx. 90 degree.
Ring 13
(5) Remove Slide plate from Cylinder 25 as illustrated in Fig. 13.
Take the disassembling step in reverse. Refer to Figs. 13 and 12.
Join the assembled Cylinder section to Tool holder with Pin 6. Refer to Fig. 8 And Secure Pin 6 with Flat washer 39,
Urethane ring 38 and Ring 38 as illustrated in Fig. 11.
Impact bolt
Rubber ring 13
Cylinder 25
Ring 13
Tool holder
Fig. 14
Note: Ring 13 is not reversible. Assemble it to Impact bolt as illustrated in Fig. 14.
Slide plate
Facing this Conical portion
to Impact bolt, assemble Ring 13.