![background image](http://html.mh-extra.com/html/makita/hr2610/hr2610_technical-information_231129015.webp)
P 1
5
/ 2
2
R
epair
Note: 2
Fig. 41
Note:
1.
Use an extra Piston cylinder as a jig. Never use Piston cylinder that is to
be assembled to the machine.
2 The end gap of Ring spring 28 must not be located at the two holes of
Tool holder (guide) complete.
(2) Push Ring spring 28 into the inner groove of Tool holder (guide) complete
as drawn in
Fig. 41.
Note:
Do not reuse the removed Ring spring 28 if it is deformed or damaged.
Piston cylinder
as a jig
Piston cylinder as a jig
Tool holder
(guide) complete
end gap
hole
Inner groove of
Tool holder (guide)
complete
Ring spring 28
O ring case A
(HR2610)
hole
[3] DISASSEMBLY/ASSEMBLY
[3]-6. Impact bolt section in Tool holder complete for HR2610/ HR2610F
Tool holder guide complete for HR2610T/ HR2611FT (cont.)
Ring spring 28
Tool holder
(guide) complete
end gap
Ring spring 28
[Correct]
[Wrong]
Note: 1