![background image](http://html1.mh-extra.com/html/makita/hr2300/hr2300_technical-information_4173390010.webp)
P 10/ 23
[3] DISASSEMBLY/ASSEMBLY
[3]-1B. Holder section for Drill chuck for HR2310T
DISASSEMBLING
(1) Remove Tool holder set from Tool holder guide complete. (
Fig. 7
)
(2) Remove Cap 35, then separate Ring spring 19 from the groove of Tool holder using 1R003 with 1R212. (F
ig. 8
)
(3) Remove Chuck cover, then remove Steel ball 7.0 while pressing down Stopper. (
Fig. 9
)
Stopper, Guide washer, Conical compression spring 21-29 and Flat washer 21 are removed. (
Fig. 10
)
(4) Remove Ring spring 21 with 1R004 from Tool holder guide complete side.
Flat washer 24, Leaf spring and Steel ball 5 are removed. (
Fig. 11
)
(5) Remove two Steel balls 6, Torsion spring 31and Change ring from Tool holder.(
Fig. 12
)
Fig. 7
Chuck cover
Steel ball 7.0
Stopper
Chuck cover
Groove of
Tool holder
Cap 35
Ring spring 19
1R003
1R212
Torsion spring 31
Change ring
Steel ball 6
(2 pcs.)
Tool holder
Change cover
Fig. 10
Fig. 12
Fig. 11
Fig. 8
Fig. 9
R
epair
Tool holder
Tool holder
guide
complete
side
Stopper
Guide washer
Tool holder
Flat washer 21
Conical
compression
spring 21-29
Ring spring 21
Flat washer 24
Leaf spring
Steel ball 5
Tool holder guide
complete
Tool holder set
Tool holder set