Makita HR2230, Instructions Manual

Page: 3 / 40

3
ENGLISH
Explanation of general view
1-1. Switch trigger
1-2. Lock button
2-1. Reversing switch lever
3-1. Action mode changing knob
4-1. Grip base
4-2. Side grip
4-3. Loosen
4-4. Tighten 4-5. Teeth
4-6. Protrusion
5-1. Bit shank
5-2. Bit grease
6-1. Bit
6-2. Chuck cover
7-1. Bit
7-2. Chuck cover 8-1. Depth gauge
9-1. Dust cup
10-1. Blow-out bulb
11-1. Chuck adapter
11-2. Keyless drill chuck
12-1. Sleeve
12-2. Ring
SPECIFICATIONS
Model HR2230
Concrete 22 mm
Core bit 54 mm
Diamond core bit (dry type) 65 mm
Steel 13 mm
Capacities
Wood 32 mm
No load speed (min
-1
) 0 - 1,050
Blows per minute 0 - 4,050
Overall length 357 mm
Net weight 2.4 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END201-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
ENG102-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
pA
) : 89 dB(A)
Sound power level (L
WA
) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG303-1
Work mode : hammer drilling into concrete, 10 mm
diameter and 100 mm depth
Vibration emission (a
h,HD
) : 15 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENH101-8
EC-DECLARATION OF CONFORMITY
Model; HR2230
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
CE2007
000230