4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
HP347D
HP457D
Drilling capacities
Masonry
10 mm
13 mm
Steel
10 mm
13 mm
Wood
25 mm
36 mm
Fastening capacities
Wood screw
5.1 mm x 63 mm
6 mm x 75 mm
Machine screw
M6
No load speed
High (2)
0 - 1,400 min
-1
Low (1)
0 - 400 min
-1
Blows per minute
High (2)
0 - 21,000 min
-1
Low (1)
0 - 6,000 min
-1
Overall length
North/South America
216 mm
246 mm
Other countries
216 mm
239 mm
Rated voltage
D.C. 14.4 V
D.C. 18 V
Net weight
1.4 kg
1.7 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Applicable battery cartridge and charger
Battery cartridge
D.C.14.4 V Model
BL1415G / BL1420G
D.C.18 V Model
BL1815G / BL1820G
Charger
DC18WA / DC18WB
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for impact drilling in brick, brickwork
and masonry. It is also suitable for screw driving and
drilling without impact in wood, metal, ceramic and
plastic.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-2-1:
Model HP347D
Sound pressure level (L
pA
) : 82 dB (A)
Sound power level (L
WA
) : 93 dB (A)
Uncertainty (K) : 3 dB (A)
Model HP457D
Sound pressure level (L
pA
) : 81 dB(A)
Sound power level (L
WA
) : 92 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Summary of Contents for HP457DWE10
