3 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model
GD0800C
GD0810C
Collet size
8 mm max.
8 mm max.
Max. wheel point size
Max. wheel diameter
25 mm
50 mm
Max. mandrel (shank) length
46 mm
46 mm
Rated speed (n) / No load speed (n
0
)
28,000 (min
-1
)
7,000 (min
-1
)
Overall length
371 mm
371 mm
Net weight
1.7 kg
1.7 kg
Safety class
/II
• Due to our continuing program of research and development, the specifications herein are subject to change with
-
out notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord
-
ing to EN60745:
Model GD0800C
Sound pressure level (L
pA
) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model GD0810C
Sound pressure level (L
pA
) : 77 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN60745:
Model GD0800C
Work mode : surface grinding
Vibration emission (a
h
) : 4.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model GD0810C
Work mode : surface grinding
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima
-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Die Grinder
Model No./ Type: GD0800C,GD0810C
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
28.2.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
