![background image](http://html.mh-extra.com/html/makita/gau01/gau01_instruction-manual_229187014.webp)
14 ENGLISH
Saw chain is automatically lubricated when the tool is in
operation. Check the amount of remaining oil in the oil
tank periodically.
1
Fig.15
►
1.
Oil tank
To refill the tank, place the tool on a flat surface, then
push the button on the oil tank cap so that the button on
the other side stands up, and then remove the oil tank
cap by turning it.
The proper amount of oil is 160 ml (5.4 fl oz). After refill
-
ing the tank, make sure that the oil tank cap is tightened
securely.
1
2
3
Fig.16
►
1.
Oil tank cap
2.
Tighten
3.
Loosen
NOTE:
If it is difficult to remove the oil tank cap,
insert the box wrench into the slot of the oil tank
cap, and then remove the oil tank cap by turning it
counterclockwise.
1
2
Fig.17
►
1.
Slot
2.
Box wrench
After refilling, hold the tool away from the tree. Start it
and wait until lubrication on saw chain is adequate.
Fig.18