W
iring diagram
P 6 / 6
Fig. 15
Fig. 17
[2] Wiring of the Lead Wires of Pickup Coil
[3] Wiring in Handle
Lead wire of
pickup coil
(white)
Lead wire of
pickup coil
(black)
Rib
Lead wire holder
1) First, route the white lead wire of pickup coil under the rib.
And then hold both of the white and the black lead wires
with the lead wire holder. (Fig. 15)
2) When installing Handle (L) onto Motor housing, route the
two lead wires as illustrated in Fig. 16.
Boss on Handle (L)
Handle (L)
Rib
Lead wire from Controller (blue or white)
Lead wire from Controller (red)
Lead wire from Noise suppressor (white)*
Field lead wire (white)
Switch
Noise suppressor*
Before setting Switch in place, hold the four lead wires
with the lead wire holders under switch as illustrated below.
Lead wire holders
Fig. 16
Put the lead wire from Controller (blue or white)
and the lead wire from Choke coil (orange)*
under the other lead wires.
Route lead wires between rib and boss
and between rib and wall of handle (L).
Boss
Rib
Boss
Note: Some countries do not use the electrical parts with an asterisk.
Pickup coil
Motor housing
Pickup coil
