9 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
GA021G GA022G GA023G GA024G GA025G GA026G
Wheel diameter
100 mm
(4″)
115 mm
(4-1/2″)
125 mm
(5″)
100mm
(4″)
115 mm
(4-1/2″)
125 mm
(5″)
Max. wheel thickness
6.4 mm
7.2 mm
6.4 mm
7.2 mm
Spindle thread
M10
M14 or 5/8″
(country specific)
M10
M14 or 5/8″
(country specific)
Rated speed (n)
8,500 min
-1
Overall length
with BL4025
413 mm
with BL4040
425 mm
Net weight
2.8 - 3.4 kg 3.0 - 3.6 kg 3.0 - 4.4 kg 2.8 - 3.4 kg 2.9 - 3.5 kg 2.9 - 4.4 kg
Rated voltage
D.C. 36 V - 40 V max
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4025 / BL4040
Charger
DC40RA
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for grinding, sanding, wire brushing
and cutting of metal and stone materials without the use
of water.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model
Sound pressure
level (L
pA
) : (dB(A))
Sound power level
(L
WA
) : (dB(A))
Uncertainty (K) :
(dB(A))
GA021G
81
92
3
GA022G
81
92
3
GA023G
81
92
3
GA024G
81
92
3
GA025G
81
92
3
GA026G
81
92
3
NOTE:
The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
Summary of Contents for GA021G
