![Makita EE2650H Instruction Manual Download Page 9](http://html1.mh-extra.com/html/makita/ee2650h/ee2650h_instruction-manual_3908161009.webp)
9
CAUTION: Always wear gloves when handling the cutter blade.
Turn the receive washer (2) so that the hole on the receive washer aligns with
–
the hole on the gear case.
Insert the hex wrench (1) through the holes. Make sure the receive washer
–
does not turn.
Holding the hex wrench, turn the nut (5) clockwise with using a socket
–
wrench.
Remove the nut and the clamp (4).
–
Place the blade (3).
–
Return the clamp and the nut.
–
Holding the hex wrench, turn the nut counterclockwise to fasten the blade.
–
To remove the blade, perform the above steps in reverse.
–
Note: The cutter blade-fastening nut (with spring washer) wears out in course of
time. If there appears any wear or deformation on the nut, replace it.
(1)
(2)
(3)
(4)
(5)
MOUNTING OF THE BLADE
CAUTION: Before doing any work on the petrol edger, always stop the engine
and pull the spark plug connector off the spark plug.
Always wear protective gloves!
Make sure that the grip assembly is fitted between the arrow marks (1).
–
(1)
(1)
Engine
MOUNTING OF HANDLE
Summary of Contents for EE2650H
Page 78: ...78...
Page 79: ...79...
Page 80: ...Makita Corporation Anjo Aichi Japan 885327 362 www makita com ALA...