6-14-2
Assembling
6-14-2-1
For EBH252 series
Fig. 6-14-2-1-1
[1] When Spiral spring pops out of Reel:
·
Set the one end of Spiral spring to the hook of Reel.
·
Rewind the spring counterclockwise toward the center of
circle and fit the spring into Reel.
Note:
Apply Makita grease FA No.2 to the spring in advance.
Reel
Hook
Fig. 6-14-2-1-2
[2] Fit the other end of Spiral spring into the hook on the
center of Starter case.
Fig. 6-14-2-1-3
[3] Recover Recoil starter spring force by reversing the disassembly procedure shown in
Fig. 6-14-1-1
in page 26.
[4] Do the following checks of the spring force before assembling Recoil starter assembly to the machine.
Note:
·
When you fall down Starter knob, it must stand up by the spring tension.
·
When you pull Starter knob to the full, Reel must be one and 1/4 turned.
Starter knob
Spiral
spring
28 / 40
