P 8/ 35
(5) When fitting Engine cover complete (d), follow the instructions described in
Fig. 11
. Make sure that Carburetor gasket is on the inner
side of the rib inside Engine cover complete and that Plug cover is not pinched.
Align the fixing screw boss positions and then fit the cover and secure it in place with the four screws. (
Fig. 3
)
(6) Secure Band completes L and R with the fixing parts by reversing the disassembly procedure shown in
Fig. 1
while taking care not to mix
them up.
Twist the bands; Band complete R by 90 degrees clockwise and Band complete L by 90 degrees counterclockwise viewed from the top,
and then attach them. (
Fig. 12
)
Left
Right
Twist 90 degrees
Carry out disassembly and assembly
with Choke lever raised or the lever
will catch on the engine cover.
Insert along the guides
Recoil starter
Three M5x20
Pan head screws
(d)
Oil guard
:
Attach before fitting Engine
cover complete.
Cylinder block
assembly
Choke lever
Four 5x20
Tapping screws
Fig. 11
Fig. 12
Makita Corporation
