background image

9 ENGLISH

ASSEMBLY

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before carrying out any work on the tool.

Assembling hose

Insert the hose cuff into the vacuum cleaner body and 

turn it clockwise.

1

2

Fig.13

►    

1.

 Hose cuff 

2.

 Vacuum cleaner body

Using as a cleaner

Attaching bent pipe assembly

Optional accessory

NOTE:

 You don't need to perform this procedure 

if your model comes with the bent pipe assembly 

attached to the hose.

NOTE:

 There are two types of bent pipe assembly; 

the one for slide-type extension wand and the one for 

ring-type extension wand. If you prepare the bent pipe 

assembly, choose the one for your desired extension 

wand type.

The bent pipe assembly is used for connecting the exten-

sion wand or nozzle for vacuum cleaning to this product.

If you want to use this product as the vacuum cleaner, 

attach the bent pipe assembly to the hose.

To attach, unscrew the front cuff from the hose and 

fasten the sleeve of bent pipe assembly onto the hose.

To remove, loosen the sleeve of bent pipe assembly from the hose.

1

2

3

Fig.14

►    

1.

 Hose 

2.

 Bent pipe assembly 

3.

 Sleeve

Assembling nozzle and wand

Optional accessory

NOTE:

 The type of the nozzle and wand included in 

the product varies depending on countries. In some 

countries, the nozzle and wand are not included.

1.

  Twist and insert the nozzle to the extension wand.

1

2

3

4

Fig.15

►    

1.

 Extension wand 

2.

 Free nozzle 

3.

 T-shape nozzle 

4.

 T-shape nozzle (slim)

NOTE:

 By twisting the nozzle while inserting, the noz-

zle can be attached to the extension wand securely.

NOTE:

 For the model with ø38 mm hose and front 

cuff 38, attach the supplied nozzle to the aluminum 

bending pipe / aluminum straight pipe.

Summary of Contents for DVC261ZX12





















Reviews: