P
6
/
9
R
epair
[4] Conversion from Grass shear to Hedge trimmer
M4 countersunk slotted head screw (2 pcs.)
Shear blade
assembly
1. Fasten Shear blade assembly to Housing set with two M4 countersunk slotted head screws.
Fig. 11
(4) After fastening Shear blade assembly to Housing set with two M4 countersunk slotted head screws,
assemble Under cover complete. (
Fig. 11
)
2. Put Under cover complete on the bottom of
Housing set.
3 Turn Under cover complete toward the locking position
with Lock lever pressed.
Lock lever
Under cover
complete
Unlocked position
Locking position
(1) Remove Shear blade assembly. (
Fig. 2
)
(2) Put Crank complete upside down. (
Fig. 9
)
(3) Mount Shear blade assembly (option) for
hedge trimmer on Crank housing. (
Fig. 10
)
1. Turn Crank complete
until the projections
come to the following
position.
Joint of Housing L
and Housing R
2. Slide the elliptic holes of Shear blade A
and B to engage with Crank complete,
and then insert an M4 Pan head screw
(as a fixing screw) temporarily to
maintain their positions.
M4 Pan head
screw
Shear blade B
Guide plate
Shear blade A
Shear blade assembly
for Hedge trimmer
(option)
Hole to maintain
the positions of blades
Crank complete
Fig. 10
Fig. 9
3. Set Shear blade assembly in place
while holding the M4 Pan head
screw by hand.
Remove the M4 Pan head screw.
Note
: Crank portions of Shear blades A
and B have to be fit into Crank
complete correctly.
Projections for
Hedge trimmer
Head and tail of
Crank complete
Projections for
Grass shear
