11
ENGLISH
Assembly for blowing
Installing or removing blower pipe
and nozzle
1.
Attach the blower pipe to the main unit.
Insert the blower pipe into the main unit with the bolt
facing left as shown in the figure. Turn the blower pipe
as shown in the figure so that the bolt is aligned with the
hole on the main unit, and then tighten the bolt firmly
using the hex wrench.
►
Fig.1:
1.
Bolt
2.
Blower pipe
2.
Align the protrusion on the blower pipe with the
groove on the end nozzle, then attach the end nozzle to
the blower pipe, and then turn the end nozzle to lock it
into place.
►
Fig.2:
1.
End nozzle
2.
Blower pipe
To remove the blower pipe and end nozzle, perform the
installation procedure in reverse.
NOTE:
The length of the nozzle can be changed by
moving the nozzle as shown in the figure.
►
Fig.3:
1.
End nozzle
2.
Blower pipe
Installing or removing flat nozzle or
extension nozzle
Optional accessory
Attach the flat nozzle or extension nozzle to the end
nozzle, and then turn it to lock it into place.
►
Fig.4:
1.
Flat nozzle
2.
Extension nozzle
3.
End
nozzle
You can also attach the flat nozzle or extension nozzle
to the blower pipe.
►
Fig.5:
1.
Flat nozzle
2.
Extension nozzle
3.
Blower
pipe
To remove the flat nozzle or extension nozzle, perform
the installation procedure in reverse.
Attaching shoulder strap
CAUTION:
Be sure to attach the hooks of
the shoulder strap to the machine securely.
If the
hooks are attached incompletely, they may come off
and cause an injury.
CAUTION:
Be sure to use the shoulder strap
dedicated to this machine.
Using other shoulder
strap may cause an injury.
Attach the hooks of the shoulder strap to the machine
as shown in the figure.
►
Fig.6:
1.
Hook
The shoulder strap features a means of quick release.
Simply squeeze the sides of the buckle to release the
machine from the shoulder strap.
►
Fig.7:
1.
Buckle
Assembly for vacuuming
Installing or removing suction pipe
and nozzle
Optional accessory
1.
Align the triangle mark on the suction nozzle with
that on the suction pipe, and then insert the suction
nozzle into the suction pipe until the latch on the nozzle
snaps into place.
►
Fig.8:
1.
Suction nozzle
2.
Suction pipe
3.
Triangle
mark
2.
Loosen the bolt on the fan cover using the hex
wrench, and open the fan cover.
►
Fig.9:
1.
Bolt
2.
Fan cover
3.
Hex wrench
3.
Align the triangle mark on the suction pipe
with
mark on the main unit, and then attach the
suction pipe to the main unit.
►
Fig.10:
1.
Suction pipe
2.
Triangle mark
3.
mark
4.
Turn the suction pipe clockwise so that the bolt
on the pipe is aligned with the hole on the main unit,
and then fasten the bolt firmly using the hex wrench to
secure the pipe to the main unit.
►
Fig.11:
1.
Suction pipe
2.
Bolt
To remove the suction pipe and nozzle, perform the
installation procedure in reverse.
Installing or removing elbow pipe
and dust bag
Optional accessory
1.
Insert the elbow pipe into the dust bag and tighten
the belt to fix the elbow pipe as shown in the figure.
►
Fig.12:
1.
Dust bag
2.
Elbow pipe
3.
Belt
2.
Attach the elbow pipe to the main unit.
Insert the elbow pipe into the main unit with the bolt
facing left as shown in the figure. Turn the elbow pipe
as shown in the figure so that the bolt is aligned with the
hole on the main unit, and then tighten the bolt firmly
using the hex wrench.
►
Fig.13:
1.
Bolt
2.
Elbow pipe
3.
Attach the hook of the dust bag to the shoulder
strap, and then attach the hooks of the shoulder strap to
the main unit as shown in the figure.
►
Fig.14:
1.
Hook
To remove the dust bag and elbow pipe, perform the
installation procedure in reverse.
Summary of Contents for DUB363ZV
