![background image](http://html1.mh-extra.com/html/makita/dpb181/dpb181_technical-information_3857092012.webp)
P 1
2
/
18
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Upper Holder 42, Lower Holder 42
DISASSEMBLING
(1) Remove Upper holder 42 and Lower holder 42 as drawn in
Fig. 15
.
(2) Disassemble Upper/Lower holder section as drawn in
Fig. 16
.
Remove Lower holder 42 and
Upper holder 42 by unscrewing
4x18 Tapping screws (2 pcs. each).
Fig. 15
Fig. 16
4x18
Tapping screw
4x18
Tapping screw
Lower holder 42
Upper holder 42
Pin 6
Ball bearing 696ZZ
Ball bearing
696ZZ (4 pcs.)
Flat
washer 6
Flat washer 6
1. Using Screwdriver No. 3, disassemble four Ball bearings 696ZZ
and two Flat washers 6 by unscrewing two M5 +Pan head screws.
2. Remove another Ball bearing 696ZZ together with Pin 6.
And pull off Pin 6 from the bearing.
Upper/Lower holder section
Screwdriver No. 3
M5 +Pan head
screw (2 pcs.)