![background image](http://html.mh-extra.com/html/makita/dp3003/dp3003_instruction-manual_225767004.webp)
4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DP3003
DP4000
DP4001
DP4002
DP4003
Drilling capacities
Steel
10 mm
13 mm
Wood
32 mm
38 mm
No load speed
0 - 1,200 min
-1
0 - 950 min
-1
0 - 700 min
-1
Overall length
296 mm
304 mm
308 mm
304 mm
308 mm
Net weight
2.2 kg
2.5 kg
2.4 kg
2.7 kg
2.5 kg
Safety class
/II
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Model DP3003
Sound pressure level (L
pA
) : 81 dB(A)
Sound power level (L
WA
) : 92 dB (A)
Uncertainty (K) : 3 dB(A)
Model DP4001
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model DP4002 / DP4003
Sound pressure level (L
pA
) : 82 dB(A)
Sound power level (L
WA
) : 93 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN62841-2-1:
Model DP3003
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model DP4001
Work mode: drilling into metal
Vibration emission (a
h,D
) : 8.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DP4002 / DP4003
Work mode: drilling into metal
Vibration emission (a
h,D
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.