23
ENGLISH
6.
Do not operate the wireless unit in places
where medical instruments, such as heart
pace makers are nearby.
7.
Do not operate the wireless unit in places where
automated devices are nearby.
If operated, auto-
mated devices may develop malfunction or error.
8.
Do not operate the wireless unit in places
under high temperature or places where
static electricity or electrical noise could be
generated.
9.
The wireless unit can produce electromagnetic
fields (EMF) but they are not harmful to the user.
10.
The wireless unit is an accurate instrument. Be
careful not to drop or strike the wireless unit.
11.
Avoid touching the terminal of the wireless
unit with bare hands or metallic materials.
12.
Always remove the battery on the product
when installing the wireless unit into it.
13.
When opening the lid of the slot, avoid the
place where dust and water may come into the
slot. Always keep the inlet of the slot clean.
14.
Always insert the wireless unit in the correct
direction.
15.
Do not press the wireless activation button
on the wireless unit too hard and/or press the
button with an object with a sharp edge.
16.
Always close the lid of the slot when operating.
17.
Do not remove the wireless unit from the slot
while the power is being supplied to the tool.
Doing so may cause a malfunction of the wireless
unit.
18.
Do not remove the sticker on the wireless unit.
19.
Do not put any sticker on the wireless unit.
20.
Do not leave the wireless unit in a place where
static electricity or electrical noise could be
generated.
21.
Do not leave the wireless unit in a place sub-
ject to high heat, such as a car sitting in the
sun.
22.
Do not leave the wireless unit in a dusty or
powdery place or in a place corrosive gas
could be generated.
23.
Sudden change of the temperature may bedew
the wireless unit. Do not use the wireless unit
until the dew is completely dried.
24.
When cleaning the wireless unit, gently wipe
with a dry soft cloth. Do not use benzine, thin-
ner, conductive grease or the like.
25.
When storing the wireless unit, keep it in the
supplied case or a static-free container.
26.
Do not insert any devices other than Makita
wireless unit into the slot on the tool.
27.
Do not use the tool with the lid of the slot dam-
aged.
Water, dust, and dirt come into the slot may
cause malfunction.
28.
Do not pull and/or twist the lid of the slot more
than necessary.
Restore the lid if it comes off
from the tool.
29.
Replace the lid of the slot if it is lost or
damaged.
SAVE THESE INSTRUCTIONS.
PARTS DESCRIPTION
►
Fig.2
1
Slide pole
2
Stopper pin (for carriage
sliding)
3
Vertical vise
4
Releasing button (for
right side bevel angle)
5
Sub base
6
Turn base
7
Pointer (for miter angle)
8
Miter angle scale
9
Kerf board
10
Blade case
11
Adjusting screw (for
laser line)
12
Range adjustment screw
(for laser line)
13
Blade guard
14
Knob (for bevel angle)
15
Hex wrench
16
Sub fence
17
Adjusting screw (for
lower limit position)
18
Adjusting bolt (for maxi
-
mum cutting capacity)
19
Stopper arm
20
Battery cartridge
21
Lock lever (for turn base)
22
Releasing lever (for turn
base)
23
Grip (for turn base)
-
-
►
Fig.3
1
Stopper pin (for carriage
elevation)
2
Hose (for dust
extraction)
3
Guide fence (upper
fence)
4
Guide fence (lower
fence)
5
Switch trigger
6
Lock-off button
7
Hole for padlock
8
Lid (for wireless unit)
(For DLS211 only)
9
Switch (for laser line)
10
Battery indicator
11
Mode indicator
12
Check button
13
Wireless activation
button
14
Wireless activation lamp
15
Dust bag
16
Bevel angle scale
17
0° adjusting bolt (for
bevel angle)
18
Pointer (for bevel angle)
19
45° adjusting bolt (for
bevel angle)
20
Latch lever (for bevel
angle)
21
Releasing lever (for 48°
bevel angle)
-
-
-
-
-
-
Summary of Contents for DLS211
