4
REPAIR
4-1
Lower pipe, Upper pipe complete, Switch lever
4-1-1
Disassembling
Fig. 4-1-1-1
[1] Remove Rear bag ass’y from Deck by lifting it up.
[2] While holding Lower pipe or Upper pipe complete, loosen two M8x35 Thumb screws and remove the assembled part of
Lower pipe and Upper pipe complete from Deck.
Remove
Upper pipe
complete
M8x35 Thumb
screw (2 pcs.)
Lower pipe
Rear bag ass'y
Deck
Upper pipe
complete
Remove
Lower pipe
M8x35 Thumb
screw
(2 pcs.)
Fig. 4-1-1-2
[3] Pull out two Holders.
[4] Loosen two M6x50 Cup hex square neck bolts until the second thread is disengaged from M6 Thumb nut.
Note:
The first thread remains engaged to prevent the bolts/nuts from falling off.
[5] Loosen two M6 Thumb nuts by turning and pulling them while pressing the head of the bolts to disengage the first thread.
Pull out
First thread
Press the head of bolt.
Holder
Holder
M6 Thumb nut
M6 Thumb nut
M6x50 Cup hex
square neck bolt (2 pcs.)
Upper pipe
complete
Lower pipe
[6] Remove Lower pipe from Upper pipe complete.
Second thread
4 / 21
