4
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Cutting action changing lever
4-1. Lock switch
4-2. ON/standby switch
5-1. Speed adjusting dial
6-1. Jig saw blade
7-1. Base
7-2. Hex wrench
8-1. Cover plate
8-2. Base
9-1. Anti-splintering device
9-2. Base
10-1. Dust nozzle
10-2. Base
11-1. Clamp screw
12-1. Dust nozzle
12-2. Hose for vacuum cleaner
13-1. Cutting line
13-2. Base
15-1. Base
15-2. Hex wrench
15-3. Bolt
16-1. Bevel slot
16-2. Base
16-3. Bolt
16-4. Graduations
16-5. V-notch
16-6. Gear housing
17-1. Base
17-2. Hex wrench
17-3. Bolt
18-1. Starting hole
21-1. Rip fence
22-1. Hex wrench
22-2. Bolt
22-3. Fence guide
24-1. Fence guide
24-2. Threaded knob
24-3. Circular guide pin
26-1. Bolt
26-2. Ruler bar
27-1. Guide rail adapter
27-2. Screw
27-3. Guide rail
SPECIFICATIONS
Model DJV141
DJV181
Length of stroke
26 mm
26 mm
Wood 135
mm 135
mm
Mild steel
10 mm
10 mm
Max. cutting capacities
Aluminum
20 mm
20 mm
Strokes per minute (min
-1
)
800 - 3,500
800 - 3,500
Overall length
280 mm
298 mm
Net weight
2.4 kg
2.5 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE019-1
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 78 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting boards
Vibration emission (a
h,B
) : 6.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,M
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
