3
ENGLISH (Original instructions)
Explanation of general view
1-1. Button
1-2. Red indicator
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. CHECK button
4-1. Slide switch
5-1. Indication lamp
6-1. Wrench 13
6-2. Wheel point
6-3. Collet nut
6-4. Wrench 13
9-1. Limit mark
10-1. Holder cap cover
10-2. Screwdriver
11-1. Brush holder cap
11-2. Screwdriver
SPECIFICATIONS
Model DGD800
DGD801
Collet capacity
6 mm or 6.35 mm (1/4")
Max. wheel point diameter
36 mm
Max. mandrel (shank) length
46 mm
No load speed (n
0
) / Rated speed (n)
26,000 (min
-1
)
Overall length
402 mm
307 mm
Net weight
2.0 kg
1.7 kg
Rated voltage
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE050-1
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 72 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model DGD800
Work mode : surface grinding
Vibration emission (a
h,SG
) : 6.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DGD801
Work mode : surface grinding
Vibration emission (a
h,SG
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-18
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Die Grinder
Model No./ Type: DGD800, DGD801
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
