Makita DGA504, Instruction Manual

Page: 7 / 108

7
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE048-1
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS GRINDER SAFETY
WARNINGS
GEB059-3
Safety Warnings Common for Grinding, Sanding, Wire
Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
2. Operations such as polishing are not
recommended to be performed with this power
tool.
Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
3. Do not use accessories which are not specifically
designed and recommended by the tool
manufacturer.
Just because the accessory can be
attached to your power tool, it does not assure safe
operation.
4. The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
1. Button
2. Red indicator
3. Battery cartridge
4. Slide switch
5. Battery indicator
6. Mode indicator
7. Shaft lock
8. Wheel guard
9. Bearing box
10. Screw
11. Lever
12. Lock nut
13. Depressed center wheel
14. Inner flange
15. Lock nut wrench
16. Ezynut
17. Abrasive wheel
18. Spindle
19. Arrow
20. Notch
21. Flex wheel
22. Plastic pad
23. Sanding lock nut
24. Abrasive disc
25. Rubber pad 26. Abrasive cut-off wheel/diamond
wheel
27. Wheel guard for abrasive cut-off
wheel/diamond wheel
28. Abrasive cut-off wheel
29. Diamond wheel
30. Thickness: Less than 4 mm (5/32”)
31. Thickness: 4 mm (5/32”) or more
32. Wire cup brush
33. Wire wheel brush
34. Exhaust vent
35. Inhalation vent
36. Dust cover
Model DGA404 DGA454 DGA504
Wheel diameter 100 mm (4”) 115 mm (4-1/2”) 125 mm (5”)
Max. wheel thickness 6 mm (1/4”) 6 mm (1/4”) 6 mm (1/4”)
Spindle thread M10 M14 or 5/8” (country specific)
Rated speed (n)/No load speed (n
0
) 8,500 min
-1
Overall length
With battery cartridge
BL1815N, BL1820
348 mm
With battery cartridge
BL1830, BL1840, BL1850
362 mm
Net weight
With battery cartridge
BL1815N, BL1820
2.2 kg 2.3 kg 2.3 kg
With battery cartridge
BL1830, BL1840, BL1850
2.4 kg 2.5 kg 2.5 kg
Rated voltage D.C. 18 V