F
eatures and benefits
4/ 6
*
The same advantage as Model DFL124F/203F
New protectors are designed to prevent damage to car body etc.
*
The same advantage as Model DFL651F
*
The same advantage as Model DFL082F/301F/402F
Auto-stop system
Indication lamp and beeper
warn
assembly worker visually and audibly
of battery power reduction. If battery power reduces further, the motor
automatically stops to prevent incomplete fastening.
(See the instruction manual for detailed information on the behavior of
the lamp and the beeper.)
BL motor
same Motor as DFL651F
*
* * *
* *
Single LED job light
with afterglow function
* *
*
Powered by 14 .4V Li-ion battery
BL1415N/NA/NAP
BL1430A/AP/B 3.0Ah
Note:
When using the tool with BL1430A, if necessary
fastening torque cannot be obtained, Auto-stop system
will be activated to stop the motor regardless of
the remaining battery capacity displayed on the battery.
BL1440 : 4.0Ah
BL1450 : 5.0Ah
BL1460A/AP/B 6.0Ah
1.5Ah
:
:
:
Designed to meet
homologation requirements
•
Torque accuracy value: 10%, 3 , Cm 1.67
obtained from our tests performed in accordance
with VDI/VDE2647.
•
Stable torque value
achieved by using a new bevel gear between
the clutch and the output shaft to improve
gear engagement for smooth power transmission.
New accessory (Protector)
Maintenance alarm
• A yellow LED starts blinking to
indicate that the preset number of
screws tightened is reached.
• Auto stop function can be addition-
ally preset.
Poka-yoke (mistake-proofing) device
can be externally attached.
Housing is designed to be externally equipped
with the transmitter of TW-800 series of HERUTU
ELECTRONICS CORPORATION, which is
regarded as a reliable wireless poka-yoke device
by automobile manufacturers.
Programmable speed control
• Speed control can be programmed depending on types of joints
(hard joint or soft joint) or takt time.
• Speed control program can consist of up to 6 steps
• Speed control program you have set can be entered into the
machine from your Windows (7/ 8/ 10) PC with a USB
connection.
• Forward/reverse setting is available at every one of the 6 steps.
< Illustration shows model DFL083F >
useful to hang the tool
Hook (Hanging loop)
( option)
Model
Torque range
RPM (min-1)
DFL083F
2 - 8 N
・
m
150 - 700
DFL125F
5 - 12 N
・
m
100 - 700
DFL204F
8 - 20 N
・
m
100 - 440
DFL302F
16 - 30 N
・
m
70 - 230
DFL403F
25 - 40 N
・
m
50 - 220
Spindles for 6.35mm (1/4") C form
bit and 6.35mm (1/4") Square drive
are also available as optional acces-
sories. (Only DFL083F/125F/204F)
9.5mm (3/8") Square drive
*
*
* *
*
* *
*
* *
*
*
*
*
*
*
*
*
*
*
* *
*
*
* *
*
* *
*
* *
*
* *
*
*
* *
*
*
*
* *
Description: Protector I
Part No. 422284-4, 422285-2, 422286-0,422287-8
For
DFL302F/ DFL403F
Color: red/ blue/ yellow/ transparent
Description: Protector I
Part No. 422279-7, 422280-2, 422281-0,422282-8
For
DFL083F/ DFL125F/ DFL204F
Color: red/ blue/ yellow/ transparent
