![background image](http://html2.mh-extra.com/html/makita/df330d/df330d_technical-information_4255387006.webp)
W
iring diagram
P
6
/
6
Fig. D-4
Fig. D-3
Note: Do not put the
Terminals on
the rib of Housing.
rib
rib
Bend Terminals of
DC Motor toward the
center of DC Motor as
illustrated to right.
DC Motor
Route Motor’s Lead wires (black
and red) between ribs.
rib
Lead wire holder
Connector of
LED Circuit
Connector of Switch
Put Connectors between two lead wire holders.
And fix Lead wires (black and white) with
these lead wire holders.
Switch
Switch
Switch
Lead wire (black)
Lead wire (red)
Motor’s Lead wire
(black)
Motor’s Lead wire (red)
DC Motor
rib
Put Switch lead wires (black and white)
under Switch. Do not put them on the ribs
of Housing L.
rib
screw emboss
Terminal
Do not put Lead wires to screw embosses and ribs.
Housing L
Rib
Route Lead wires
between Ribs in this area.
Fix the Lead wires with Lead wire holders.
Wiring of LED Circuit
Lead wires have to be tight
between the above area.
Put LED Circuit so that wire connecting
portion faces Gear assembly side.
LED
Wire
connecting
portion