4
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE034-1
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRIVER DRILL
SAFETY WARNINGS
GEB088-1
1.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring.
Fasteners contacting a
“live” wire may make exposed metal parts of the
power tool “live” and could give the operator an
electric shock.
4.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5.
Hold the tool firmly.
6.
Keep hands away from rotating parts.
7.
Do not leave the tool running. Operate the tool
only when hand-held.
8.
Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9.
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Star marking
5.
Indicator lamps
6.
Check button
7.
LED display
8.
Switch trigger
9.
Lamp
10. Reversing switch lever
11. Speed change lever
12. Action mode changing ring
13. Graduation
14. Arrow
15. Adjusting ring
16. Protrusion
17. Groove
18. Arm
19. Grip pole
20. Side grip
21. Sleeve
22. Bit holder
23. Bit
24. Hook
25. Screw
Model
DDF481
Capacities
Drilling into steel
13 mm
Drilling into wood
76 mm
Fastening wood screw
10 mm x 90 mm
Fastening machine screw
6 mm
No load speed (min
-1
)
High (2)
0 - 2,100
Low (1)
0 - 550
Overall length
205 mm
Net weight
2.6 kg
Rated voltage
D.C. 18 V
