23 ENGLISH
17.
Unless the tool supports the use near
high-voltage electrical power lines, do not use
the battery cartridge near high-voltage electri-
cal power lines.
It may result in a malfunction or
breakdown of the tool or battery cartridge.
18.
Keep the battery away from children.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4.
When not using the battery cartridge, remove
it from the tool or the charger.
5.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
DCU603
►
Fig.1
1
Control panel
2
Beep button
3
Switch trigger
4
Rear lamp
5
Handle
6
Battery box
7
Brake lever
8
Rear wheel
9
Rear wheel lock
10
Reflector
11
Lock lever
12 Front wheel
13 Front lamp
14 Bucket
DCU604
►
Fig.2
1
Control panel
2
Beep button
3
Switch trigger
4
Rear lamp
5
Handle
6
Battery box
7
Brake lever
8
Rear wheel
9
Rear wheel lock
10
Reflector
11
Lock lever
12 Front wheel
13 Front lamp
14 Carrier
DCU605
►
Fig.3
1
Control panel
2
Beep button
3
Switch trigger
4
Rear lamp
5
Reflector
6
Rear wheel lock
7
Handle
8
Battery box
9
Brake lever
10 Rear wheel
11
Front wheel
12 Front lamp
13 Cap
14 Flat bucket
CONFIGURATION OF
MACHINE
When the bucket is installed
►
Fig.4
1
Bucket
2
Dump unit
3
Base unit
-
-
When the carrier is installed
►
Fig.5
1
Carrier
2
Dump unit
3
Base unit
-
-
When the flat bucket is installed
►
Fig.6
1
Flat bucket
2
Base unit
ASSEMBLY
CAUTION:
Always be sure that the machine
is switched off and the battery cartridges are
removed before carrying out any work on the
machine.
Before installing or removing the carrier, bucket, flat
bucket, or dump unit, be sure to lock the brake lever.
To lock the brake lever, pull and hold the brake lever,
then pull the lock lever, and then release the brake lever
while pulling the lock lever.
►
Fig.7:
1.
Brake lever
2.
Lock lever
Summary of Contents for DCU603
