P 3 /13
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
R
epair
Sleeve 4
Tapping screw 4x25
Rubber sleeve 6
Pipe 6
Base
Hex lock nut M5-8
Pan head screw M5
Pan head screw M5
Flat head square neck bolt M6x75
Flat head square neck bolt M6x75
Hex nut M6
Stop ring E-8
Flat washer 6
For easy removal of Hex nut M6, loosen Hex nut M6
using Lever 40 as a wrench before removing Lever 40.
Lever 40
Fig. 2
Fig. 3
Fig. 4
Fig. 5
1) Remove Blade cover (transparent part) by unscrewing Tapping screw 4x12. (Fig. 2)
2) Remove Rubber sleeve 6 and Sleeve 4 by unscrewing Tapping screw 4x25. (Fig. 3)
3) Remove the following 5 parts from Flat head square neck bolt M6x75: Stop ring E-8, Lever 40, Hex nut M6,
Flat washer 6, Pipe 6. Swivel Safety cover and pull off the bolt. Remove Pan head screw M5 while fixing
Hex nut M5-8 with Wrench 8. (Fig. 4) Base can now be separated from the machine. (Fig. 5)
Tapping screw 4x12
Blade cover
(transparent)
DISASSEMBLING
Handle and Motor housing
viewed from Motor housing side
Safety cover comp.
