![background image](http://html.mh-extra.com/html/makita/dcs550/dcs550_instruction-manual_224466003.webp)
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Lever
4-1. A position
4-2. Cutting line
4-3. Base
5-1. Switch trigger
5-2. Lock-off lever
6-1. Lamp
7-1. Shaft lock
7-2. Hex wrench
8-1. Hex bolt
8-2. Outer flange
8-3. Saw blade
8-4. Inner flange
8-5. Cup washer
9-1. Hex wrench
10-1. Front grip
10-2. Rear handle
10-3. Base
11-1. Cutting line
11-2. Base
11-3. Sight grooves
12-1. Clamping screw
12-2. Rip fence (Guide rule)
13-1. Limit mark
14-1. Brush holder cap
14-2. Screwdriver
SPECIFICATIONS
Model DCS550
Blade diameter
136 mm
Max. Cutting depth
51 mm
No load speed (min
-1
) 3,600
Overall length
348 mm
Net weight
2.6 kg
Rated voltage
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE066-1
Intended use
The tool is intended for cutting in mild steel and
aluminum only with appropriate saw blades.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 78 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting metal
Vibration emission (a
h,M
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Metal Cutter
Model No./ Type: DCS550
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
Summary of Contents for DCS550
Page 70: ...70 ...
Page 71: ...71 ...
Page 72: ...72 Makita Corporation Anjo Aichi Japan www makita com 885282 964 ...