18
2
Installing the ignition armature
NOTE:
The high-voltage cable is moulded
onto the ignition system and cannot be
replaced separately.
Insert the armature and turn the screws in
almost all the way.
Lay the high-voltage cable with the ingition
cable as show.
Fasten the ignition cable with screws
2
.
Insert the setting gauge (944.500.891)
between the ignition armature and the
fylwheel.
Position the flywheel so that the magnet is
against the armature (gap 0.25 – 0.3 mm).
Press the armature against the gauge towards
the flywheel and tighten the armature screws.
07
IGNITION SYSTEM
