12
Remove the hood.
Move piston to bottom dead centre (visible
through the exhaust opening).
Push the piston stop wedge
6
(944.602.000)
into the exhaust opening.
Note:
Before the piston stop wedge is
pressed into the exhaust opening, it is
necessary to remove the carbon insert in the
exhaust. During assembly the gasket must
always be between the muffler and the guard
plate!
Insert wrench
7
(Chap. 00, Pos. 8) into the
clutch and use a socket wrench
8
to turn in
the direction of the arrow (left-hand thread) to
loosen and remove the clutch.
Turn the clutch over and remove the disc.
The flyweights can now be pushed off the
guide axially in one direction.
1
3
2
2
4
5
1
6
7
8
04 CLUTCH
Disassembly
CAUTION: To prevent cuts, wear protective
gloves!
Remove the sprocket guard, bar and chain.
Pull the handguard towards the front handle to
release the chain brake if necessary.
Remove the clutch drum, see Chapter 02.
Remove the muffler. To do this, unscrew 2
bolts
1
and 2 bolts
2,
and remove the
protective plate
3
.
Unscrew bolts
4
and remove the muffler
5
with
cover plate.
