P 6/ 9
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Motor Section
ASSEMBLING
7) Assemble Housing (R) to Housing (L) and mount Stay as illustrated in Fig. 10.
[3] -3. Sponge Sheet 50-50
DISASSEMBLING
Fig. 10
Fig. 11
Assemble Stay to Housing (L)
while fitting the protrusion of
Housing (L) in the notch of Stay
as illustrated to right.
Housing (R)
protrusion of Housing (L)
notch of Stay
Stay
3x16 Tapping screw (7 pcs.)
1. Remove Sponge sheet 50-50 from
the vent frame of Housing (R)/ (L).
2. Remove sponge dust remaining on
the pins of the vent frame.
ASSEMBLING
Fig. 12
1. Fitting the four pins of the vent frame
in the corresponding through holes of
new Sponge sheet 50-50, press Sponge
sheet 50-50 towards Housing (R)/ (L)
until it touches the vent frame.
2. Fix Sponge sheet 50-50 to the vent frame
by applying a little amount of adhesive
around each pin.
pin
pin
Housing (R)
Housing (L)
Sponge sheet 50-50