6
ENGLISH
(Original instructions)
Explanation of general view
1
Red indicator
2
Button
3
Battery cartridge
4
Switch trigger
5
Reversing switch lever
6
Lamp
7
Display
8
Indication button
9
Indicatiing lamp
10 Sleeve
11 Bit
12 Bit-piece
13 Standard bolt
14 Fastening torque
15 Fastening time
16 Seconds
17 Number of impacts (Presetting
number)
18 High tensile bolt
19 Limit mark
20 Rear cover
21 Screws
22 Spring
23 Recessed part
24 Arm
25 Carbon brush cap
26 Lead wire
27 Spacer
28 Hole
SPECIFICATIONS
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
GEB054-1
CORDLESS IMPACT DRIVER SAFETY
WARNINGS
1.
Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring.
Fasteners
contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the
operator an electric shock.
2.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3.
Hold the tool firmly.
4.
Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
ENC007-7
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1.
Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
Model
BTD044
BTD064
BTD104
Capacities
Machine screw
4 mm – 8 mm
4 mm – 8 mm
4 mm – 8 mm
Standard bolt
5 mm – 10 mm
5 mm – 12 mm
5 mm – 12 mm
High tensile bolt
5 mm – 6 mm
5 mm – 10 mm
5 mm – 10 mm
No load speed (min
–1
)
0 – 2,300
0 – 2,500
0 – 2,700
Impacts per minute
0 – 3,500
0 – 3,500
0 – 3,500
Overall length
144 mm
144 mm
144 mm
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
BL1430A/
BL1415NA
BL1430A/
BL1415NA
BL1430A/
BL1415NA
Net weight
1.2 kg/1.0 kg
1.3 kg/1.1 kg
1.3 kg/1.1 kg
Rated voltage
D.C.14.4 V
D.C.14.4 V
D.C.14.4 V
