W
iring diagram
P 13 /14
1) Handle L
The flag connector has to be so connected that
the wire connecting portion is positioned on
the side of pole marks of Terminal.
Flag connector
Terminal
Connecting Flag Connector to Terminal
Wire connecting portion
Pole marks
Power supply circuit
boss
rib
boss
Connector
Handle L
Lead wire holder
Switch
Terminal
Be careful not to route Brush holder lead wire
(red) over this boss.
Fix Brush holder lead wire
(black) with this lead wire holder.
Fix the following lead wires
with these lead wire holders:
* Lead wire (blue) from
Power supply circuit
to Connector
* Lead wire (blue) from
Switch to Connector
Be careful not to route
lead wire (blue) over this rib.
With this lead wire holder, fix the following
lead wires from Power supply circuit:
*2 Lead wires (black, orange) to Switch
*Lead wire (blue) to Connector
Between this boss and the inside wall
of Handle, route the following lead wires
from Power supply circuit:
*2 Lead wires (black, orange) to Switch
*Lead wire (blue) to Connector
Assemble the Connecting terminals
to Switch as illustrated below.
back of
switch
approx. 30 degrees
Connecting terminal
Fastening Connecting Terminals
to Switch
See bottom left of this page.
Fastening Connecting
Terminals to Switch
See bottom right of this page.
Connecting Flag Connector
to Terminal
