![background image](http://html.mh-extra.com/html/makita/bhr261/bhr261_instruction-manual_229219006.webp)
6
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE043-1
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
SPECIFIC SAFETY RULES
GEB007-4
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to rotary
hammer safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
1.
Wear ear protectors.
Exposure to noise can cause
hearing loss.
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
4.
Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly
recommended that you wear a dust mask and
thickly padded gloves.
5.
Be sure the bit is secured in place before
operation.
6.
Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
7.
In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper warm-
up, hammering operation is difficult.
8.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
9.
Hold the tool firmly with both hands.
10.
Keep hands away from moving parts.
11.
Do not leave the tool running. Operate the tool
only when hand-held.
12.
Do not point the tool at any one in the area when
operating. The bit could fly out and injure
someone seriously.
13.
Do not touch the bit or parts close to the bit
immediately after operation; they may be
extremely hot and could burn your skin.
14.
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
1. Red
part
2. Button
3. Battery
cartridge
4.
Switch trigger
5.
Lamp
6.
Reversing switch lever
7.
Quick change chuck for SDS-plus
8.
Change cover
9.
Change cover line
10. Quick change drill chuck
11. Spindle
12. Rotation with hammering
13. Rotation only
14. Hammering only
15. Grip base
16. Teeth
17. Loosen
18. Tighten
19. Side grip
20. Protrusion
21. Bit shank
22. Bit grease
23. Bit
24. Chuck cover
25. O symbol
26. Action mode changing knob
27. Depth gauge
28. Dust cup
29. Blow-out bulb
30. Chuck adapter
31. Keyless drill chuck
32. Sleeve
33. Ring
34. Limit mark
35. Brush holder cap
36. Screwdriver
Model
BHR261
BHR261T
Capacities
Concrete
26 mm
Steel
13 mm
Wood
32 mm
No load speed (min
-1
)
0 - 1,200
Blows per minute
0 - 4,800
Overall length
363 mm
387 mm
Net weight
4.5 kg
4.8 kg
Rated voltage
D.C. 36 V
Summary of Contents for BHR261
