Makita 9561CH, Instruction Manual

Page: 5 / 88

5
ENGLISH
(Original instructions)
Explanation of general view
1 Shaft lock
2 Slide switch
3 Speed adjusting dial
4 Wheel guard
5 Bearing box
6 Screw
7 Lever
8 Lock nut
9 Depressed center grinding
wheel/Multi-disc
10 Inner flange
11 Lock nut wrench
12 Abrasive disc
13 Rubber pad
14 Marking A
15 Marking B
16 Marking C
17 Pin
18 Vent 19 Wire cup brush/Wire bevel
brush
20 Abrasive cut-off wheel/diamond
wheel
21 Wheel guard for abrasive cut-off
wheel/diamond wheel
22 Exhaust vent
23 Inhalation vent
SPECIFICATIONS
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
GEB033-8
GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding,
Wire Brushing, or Abrasive Cutting-Off Operations:
1.
This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read
all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Model 9561CH 9562CH 9563C 9564C 9565C
Depressed center wheel diameter 115 mm 125 mm 100 mm 115 mm 125 mm
Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm
Spindle thread M14 M14 M10 M14 M14
Rated speed (n) / No load speed (n
0
) 12,000 min
–1
Overall length 289 mm 299 mm
Net weight 2.2 kg 2.2 kg 2.1 kg 2.3 kg 2.3 kg
Safety class /II
Model 9561CVH 9562CVH 9564CV 9565CV
Depressed center wheel diameter 115 mm 125 mm 115 mm 125 mm
Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm 6.4 mm
Spindle thread M14 M14 M14 M14
Rated speed (n) / No load speed (n
0
) 12,000 min
–1
Overall length 289 mm 299 mm
Net weight 2.2 kg 2.3 kg 2.3 kg 2.4 kg
Safety class /II