(1) Replacing of armature
i) Remove wheel, wheel cover, and bearing box respectively.
(Refer to owner's manual for wheel cover removing method.)
ii) Remove gear housing and armature as one body after carbon brush is removed.
iii) Unscrew bearing retainer attaching screw (Mounted from gear housing side with M5 x 10 and M5 x 20.) and remove
armature.
iv) Be sure to mate bearing retainer guide portion with projected portion of bearing retainer before inserting and tighten with
hex socket head bolt when armature is assembled to gear housing. Adhesive is applied to hex socket head bolt then be
sure replace with new one once the bolt is removed.
Hex socket head bolt
M5 x 20
Hex socket head bolt
M5 x 10
R
epair
