(4) Turn the wrench upside down, and assemble the parts from 7 to 15.
Fig. 5
Mount the 1 hexagon socket head cap screw (M4x18) in the 4 sub-housing R, insert the 14 sleeve 4, and assemble
the 12 ratchet pawl and 13 torsion spring 7 as shown in the fig. 5.(Be careful not to catch the 14 torsion spring 7
between the 14 sleeve and 4 sub-housing in the above assembling process.)
Assemble the parts from 7 to 11 as shown in the fig.5, and mount the assembled one to the main body. (It is easier to
assemble the parts with the 15 collar positioned to the other side to the 12 ratchet pawl.)
(5) Mount the (3) sub-housing L and tighten the screws.(Install the spring washer on the nut for mounting the (1)
hexagon socket head cap screw (M4x18).)
(4)Sub-housing R
(12)Ratchet pawl
(5)Housing L
(13)Torsion spring
(14)Sleeve 4
(15)Collar
Assemble the parts from 7 to 10
by holding them down.
Assemble the (10) socket 21
by holding it down.
(10)Socket 21
(11)Pin 4
(7)Torsion spring5
(8)Spring type catch
(9)Ratchet holder
One with the longer
ground part.
Mount it on the main body.
One with the smaller diameter.
Fig.6
