P 3 / 7
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Disassembling/Assembling Feeder Box Assembly
DISASSEMBLY
1) First, separate Casing assembly from Housing and Screw guide by unscrewing two M4x28 Thumb screws
then pulling in the direction of the arrow. (Fig. 2)
2) Then, following the steps described below,
disassemble Feeder box assembly:
2)-1. By removing 4x12 tapping screw and two 4x20
Tapping screws, casing assembly can be
disassembled into Feeder box assembly,
Compression spring 21, Plate, Dial assembly
and Casing (R) and (L). (Fig. 3)
2)-2. While pushing Lever, pull off Stopper base
from Feeder box assembly. Then remove Lever
and Compression spring 2 from Feeder box
assembly. (Fig. 4)
2)-3. Separate Box cover complete from Feeder box
by removing Pan head screw M4x18. (Fig. 5)
2)-4. Remove Compression spring 6
and Ratchet arm complete from
Feeder box. Then remove the
assembly of Stopper, Torsion
spring 4 and Pin 3. (Fig. 6)
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Thumb screw M4x28
Casing assembly
Spindle
Screw guide
Housing
Plate
Feeder box assembly
Compression spring 21
Tapping screw 4x20 (2pcs)
Tapping screw
4x12
Dial assembly
(Adjusting knob)
Casing (R)
Casing (L)
Stopper base
Lever
Lever
Compression
spring 2
Pan head screw M4x18
Feeder box
Box cover complete
Compression spring 6
Torsion spring 4
Pin 3
Stopper
Ratchet arm comp.
