background image

R

epair

P 9 / 13

< 5 > Assembling change ring
         When separating gear assembly from housing, change ring can easily slip off from gear  assembly.
         Re-assemble change ring to gear assembly as follows.
         1. Align the widest bulge of spring holder to the bulge of gear assembly by turning spring holder.
         2. Assemble change ring by aligning the bulge of change ring's edge to the portion of gear assembly 
             marked with circle by the bulge of gear assembly. 

Change ring

Bulge of 
change ring's edge

Bulge of 
change ring's edge

Bulge of 
gear assembly

Bulge of 
gear assembly

The widest bulge of 
spring holder

1

2

3

4

16

15

14

1

2

3

4

16

15

14

< 3 > Disassembling gear assembly and motor section  See Fig. 3.
          Lifting up mode change lever, separated change ring, gear assembly, yoke, armature and endbell from housing
          as a set.

< 4 > Assembling leaf spring   See Fig. 5.
          Assemble leaf spring to housing L as illustrated in Fig. 4. 

Mode change lever

Change ring

Yoke

Armature

Endbell

Gear assembly

Remove as a set without separating from each other.

< Note in disassembling >

Remove so careful that the following springs
do not spring out. 

Lock lever

Compression spring 2

Compression spring 2: installed in mode change
                                        lever.
Torsion spring 2: fixing mode change lever 
                               on gear assembly

Mode change lever

Torsion spring 2

Gear assembly

Fig. 3

Fig. 4

Fig. 5

Leaf spring

 Housing L

 Housing L

Summary of Contents for 6207D














Reviews: