4
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
............... Read instruction manual.
................ DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment together with house-
hold waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric equip-
ment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for cutting in wood, plastic and fer-
rous materials.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
1.
Switch trigger
2.
Lock button
3.
Speed change switch
4.
Blade tightening lever
5.
Protrusion
6.
Bearing
7.
Blade
8.
Blade guide
9.
Wheel
10. Blade guard
11. Push
12. Hex wrench
13. Stopper plate
14. Bolt
15. Triangular rule
16. Cutting wax
17. Tire
18. Lip
19. Limit mark
20. Screwdriver
21. Brush holder cap
Model
2106
Max. cutting
capacity
Round workpiece
115 mm dia.
Rectangular
workpiece
Without optional stand
115 mm x 115 mm
With optional stand
75 mm x 110 mm
Blade speed (min
-1
)
High
80 m
Low
60 m
Blade size
Length
1,140 mm
Width
13 mm
Thickness
0.5 mm
Overall dimensions
H x W x L
235 mm x 230 mm x 500 mm
Net weight
5.5 kg
Safety class
/II
